Shoe Slip Resistance Tester HTF-744-Manufacturer-HUST TONY

Shoe Slip Resistance Tester HTF-744

Shole Slip Resistance Tester is used for testing the anti-slip

performance of soles heels or material test by the

friction between shoes and different mediums

(board,PVC,ceramic tile or other material) under

specified load.

Youtube video :Click here

Technical Specifications

Model	HTF-744
Vertical load cell range	1000N
Horizontal load cell range	1000N
Sliding speed	(0.3±0.03)m/s
Static contact time	0.5s
Test normal force	500±25N, For footwear of European size 40 (UK size 6.5) and above
	400±20N, For footwear of European size below 40 (UK size 6.5)
Wedge angle gauge	7°
Control method	Computer-controlled
Monitor	19-inch
Test floor	Pressed ceramic tile floor, stainless steel plate
Power supply	190×86×171 cm
Weight	Approx 500 kg
Standards accessories	7°Wedge angle gauge	2pcs
	Shoe last fixture	2pcs
	Prosthetic foot fixture	2pcs
	180×90×90mm calibration rubber fixture	1pc
	Stainless steel plate	1pc
	100×70mm steel block	1pc
	Power line	1pc

Test Principle

1. Made of rigid steel and aluminum alloy.
2. Equipped with a planetary reducer: the reduction ratio is 1:15, and the operation is low noise.
3. Adopts precision linear quide rail.
4. Fitted with a high-end brake clutch
5. The pressurization system is controlled by a Japanese SMC proportional valve, which is automaticallypressurized after the computer setting.
6. High-speed acquisition system and special test software.
7. The system responds quickly, and the control deviation is small.
8. The test result contains a curve graphic of the test process.
9. The test result allows to be printed out.
10. Equipped with leakage protection, pressurized overload protection, air buffer stroke limit protection, emergencystop switch, and other protection devices.
11. Comes with a pneumatic spray gun as the cleaning device.