EN 71 Feeler Gauge TW-711-EN71-1-Toy Test-Manufacturer-HUST TONY
EN 71 Feeler Gauge TW-711
EN 71 Feeler Gauge is used to determine whether parts on toys can be stepped up so as to determine whether the tensile testing is necessary.
Application Of Feeler Gauge
Feeler gauge with a thickness of 0.4mm±0.02mm and an insertion edge radius of approximately 3 mm.
Test method Of Feeler Gauge
If the component to be tested cannot be gripped between thumb and forefinger, establish whether it is grippable by inserting the feeler gauge between the component and the underlying layer or body of the toy at an angle between 0°and 10° from the toy surface using a force of (10 ± 1) N. If the gauge can be inserted more than 2 mm, the component shall be considered as grippable.
Technical Specifications
Model | TW-711 | |
Material | Stainless steel + Aluminum alloy | |
Feeler Gauge Thickness | 0.4mm | |
Insertion Edge Radius | 3mm | |
Dimension | 10×10×70 mm | |
Weight | 40 g | |
Optional Accessories | 1 Set | |
Standard
EN-71-1 section 8.4.1.3
Related Products
-
-
Other Toy Test TemplatesFlat Claw Clamp TW-232-For Toys Tension Test-Manufacturer-HUST TONY
Read more -
-
-
Other Toy Test TemplatesClamp for Wheel Tension TW-237-Toy Tension Test-Manufacturer-HUST TONY
Read more -
-
-
