IPX7 Water Immersion Test Chamber WT-09-Supplier

IPX7 Water Immersion Test Chamber WT-09

IPX7 Water Immersion Test Chamber.Simulate the damage of natural water (rain, seawater, river water, etc.) to products and materials, and waterproof testing of product casings.

Standard:

IEC60529:1989 +A1:1999 +A2:2013
GB/T4208-2017 Housing Protection Rating (IP Code) 14.2.7
GB7000.1 Lamps Part I: General Requirements and Trials 9.2.8

Technical Specifications

Model	WT-09
The Size Outside The Water Tank	117011001360 mm (include casters
The Size of The Inner Box	100010001200 mm
The Highest Test Depth of Water	1 .2m
Inner Box Thickness	1.5mm
Observe The Perspective Window	Tempered glass (thickness: 12mm)
Observe The Width of The Window	200 mm
Water Level Adjustment Method	Water in/drain valve, manual adjustment
The Water Level is Displayed	Stainless steel ruler (precision 1mm), horizontal visual
Rack Material	Stainless steel square tube
Standard Accessories	2 Pcs	3 Meter water tube
Terms of Use :
Environmental Requirements	1. Ground is flat, drainage is smooth, the ground and walls are waterproof setting ground leakage or drainage ditches. 2. Well ventilated. 3. No strong electromagnetic field around 4. No flammable, non-explosive, non-corrosive substances and dust around 5.Rack and control box Distance: 800-1000mm

Application

IPX7 Water Immersion Test Chamber – Waterproof Tester .Water Immersion Test Machine has been widely used in domestic commodity inspection bureau and the domestic and foreign products, quality authentication laboratory and the domestic and foreign well-known electronics manufacturers.

Equipment performance had achieved the international advanced level, cost-effective.

Features

1. Suitable for product IPX7waterproof testing.

2. Chambermax allowable water depth of the box is 1.2 M, the bottom area: 1000 x 1000mm. (Customizable)

3. The immersion tank has a double-layer structure.

4. Inner layer is made of SUS304 stainless steel+ 40 square tube to do the reinforcement, to keep the inner box will not deform + outer layer is welded with hair-printed stainless steel plate.

5. In and out of the waterway pipes under the installation water tank

6. The observation window material is 12mm tempered glass, which can observe the test condition of the sample.

7. The stainless steel base frame is equipped with heavy casters and a cup of feet ,easy movement and fixation.

8. The stainless steel ruler can shows the water level precisely.

9. There is a stainless steel hook on top of the inner box for easy hanging test samples.