sale@tonyhk.hk

Toy Safety Test: Drop Test

Toy Safety Test: Drop Test

Hust Tony has advanced children’s toy tester, rich experience in toy safety testing, and can provide toy safety testing equipment according to customers’ market needs and various toy safety standards.

Today we introduce the second part of the toy test: The Drop Test

Test Procedure:After dropping the toy to the floor in the strictest direction and at a certain height, and discarding a certain number of parts, check the availability of dangerous points, dangerous sharp edges, dangerous parts and dangerous driving parts.

 

 

Judgement Standard:Toys designed for small children who cannot sit up alone should not crack, which is acceptable if the crack does not cause obvious damage.Toys designed for children under the age of 3 should not produce small parts, accessible sharp points and sharp edges.

 

 

The headgear and helmet should not expose sharp lobes, edges, or loose material that may enter the eye. The drive to become accessible is harmful

EN Drop Test Floor TW-200B-Manufacturer-Hust Tony.Test the damage of toys dropped from a specific height.Conforms to EN71-1-2014+A1-2018 test standard.

Toy Testing Equipment:

EN Drop Test Floor TW-200B

Standards:

EN71-1-2014+A1-2018 8.5

 

 

ASTM Drop Tester TW-200D

Standards:

ASTM F963 section 8.7.1 and 8.7.2

16CFR 1500 section 51 and 52 and 53

GB6675.2-2014 5.24.2

ASTM Drop Tester TW-200D-Manufacturer-Hust Tony.Test the damage of toys dropped from a specific height.Conforms to ASTM F963 section 8.7.1 and 8.7.2
EN Drop Test Floor TW-200B-Manufacturer-Hust Tony.Test the damage of toys dropped from a specific height.Conforms to EN71-1-2014+A1-2018 test standard.